進口NORGREN單向節(jié)流閥，SXE9673-A60-00B/220VAC
End plates, fixing studs and central
ring: stainless steel 1.4301
Rubber part: fabric reinforced NR-,
SBR- and BR compound rubber
(KM/31000), fabric reinforced butyl
(TKM/31000), fabric reinforced
Epichlore (EKM/31000)
Important note: The design of these air bellows allows an
operation at an angle of 5° to 25°. The top and bottom
plate can be out of alignment, depending on the height of
the air bellow and the number of convolutions. To avoid
Compressed air, filtered, lubricated or
ISO 6431, VDMA 24562, NFE 49-003-
1 and corresponding BS and CETOP
Double acting with magnetic piston
and adjustable cushioning
Operating pressure:
-20°C to +80°C max.
Consult our Technical Service for use below +2°C
* Insert stroke length in mm. Cylinder
damage, mechanical stops at both end positions have to
be used. To return air bellows to their minimum height an
external return force must be used. The thrust depends
directly on the height of the air bellow: when height
increases, the thrust decreases. As the outside diameter
Air bellow materials Substitute
High temperature (Butyl) T
Extreme temperature (Epichlore) E
Safety note: These actuators must not be pressurised when unrestrained.
For exact calculation for compact air bellows please contact our Technical

進口NORGREN單向節(jié)流閥，SXE9673-A60-00B/220VAC